Skip to content
Traxxas TRA78097-4-GRN XRT Ultimate

Traxxas TRA78097-4-GRN XRT Ultimate

SKU TRA78097-4-GRN
Sold out
$2,134.72 - $2,134.72
$2,134.72
$2,134.72
$2,134.72 - $2,134.72
$2,134.72

 

 

  • High-Performance Aluminum Upgrades
    • 6061-T6 aluminum C-hubs
    • 6061-T6 aluminum steering blocks
    • 6061-T6 aluminum rear hub carriers
    • 6061-T6 aluminum differential housings
    • 6061-T6 aluminum motor mounts
  • VXL-8s™ Waterproof Electronic Speed Control
    • New aggressive tune for more power at any RPM
    • Integrated cooling fan
    • 3-LED status indicators
    • Machined heat sink
    • Powered accessory ports
    • 10-gauge silicone wire
    • Integrated protection circuits
  • Velineon® 1200XL Brushless Motor
    • 4-pole 1275 kV
    • 5 mm output shaft
    • Oversize aluminum heatsink for improved cooling
    • Dual cooling fans
  • Up to 60+ mph with Two 4s LiPo Batteries (sold separately)
  • Traxxas Stability Management®
    • Improves straight line acceleration and braking on low-traction surfaces
    • Never dulls throttle or slows the truck
    • Adjusts from off to 100% assistance from the transmitter
  • TQi™ 2.4 GHz  2-Channel Radio System with Factory-Installed Wireless Module
    • Factory-installed telemetry sensors
    • 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
    • Patented waterproof receiver box with easy-access plug
  • X-Maxx® Spec 8s Drivetrain
    • Machined, hardened steel pinion and spur gear
    • Full-time shaft-driven 4-wheel drive
    • Heavy-duty steel CV driveshafts & axles
    • Splined aluminum center driveshaft
    • Machined aluminum stub axles
  • Transmission
    • Mod-1 pinion and spur gears
    • Torque-Biasing Center Drive
  • Maxx® Spec Differentials
    • Heavy-duty sealed 4-gear design
    • Large scale steel ring and pinion gears
    • Splined outdrives attached with external thru-bolt method
    • New bulkhead and covers increase bearing support
  • Rock-Solid Motor Mounting System
    • Rigid aluminum motor mounts
    • Precise preset gear mesh adjustments
    • 4 keyed pins lock the motor in place
    • Motor retention separate from gear mesh
  • GTX™ Aluminum Race Shocks
    • Machined aluminum threaded body
    • Extra-large bore and capacity
    • Ultra-smooth TiN-coated 5.2 mm damper shafts
    • Lower seal cartridge includes integrated wiper seal combination
    • Aluminum upper spring retainers
    • Aluminum shock caps with pivot balls
    • Lower spring perches bolted on
  • WideMaxx® Suspension
    • Extra-wide suspension arms
      • Made from our strongest cold-weather material
    • Double-shear connections
    • High-strength steel suspension pins with retainers
    • 4 mm machined pivot balls
    • TUBES 7075-T6 Aluminum front toe links
    • Oversized wheel bearings
  • Steering
    • 6061-T6 aluminum steering bellcranks
    • Powerful 450 oz-in metal-gear steering servo
    • Double-shear aluminum servo horn
    • Heavy-duty servo saver spring
    • Dirt evacuation channels
  • Ultra-Low-CG Chassis Design
    • Modular chassis with interlocking bulkheads
      • Low center of gravity for improved handling
      • Flat bottom design
      • Heavy-duty interlocking skid plates
      • High-strength buttressing on shock towers
    • Dual snap-lock battery compartments
      • Protects batteries from side impacts
      • Allows secondary battery-clip security
    • Interlocking components for tight tolerances
  • ProGraphix® Clipless Body
    • Snaps in place in just seconds
    • Secure body latches are easy to use
    • Clipless body mounting system
    • Rigid internal frame
    • Dual high-capacity cooling ducts
    • Molded body reinforcements for tear-through protection
    • Protective top skids
    • Rugged high-downforce rear wing
  • Heavy-duty Bumpers
    • Reinforced front bumper and rear wing support
      • Absorb impact forces while retaining shape
    • Heavy-duty front bumper and support
    • Reinforced rear wing support
    • Nerf bars for side impact resistance
    • Heavy-duty wheelie bar with carry handle
  • Wheels and Tires
    • 7.4″ Gravix™ belted race tires
      • Belted carcass virtually eliminates ballooning at high speed
      • Low sidewall for sharp turn-in response
      • Runs quieter than traditional off-road tires
    • 3.8″ matte black XRT race wheels
    • High-strength glue and bead design
    • Huge 24 mm splined wheel hubs
  • Sealed Ball Bearings
  • Hex hardware with Rust-Resistant Black Oxide Coating